Engineering a turbo NA6

MX5 Car Clubs of Australia

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 10:41 am

Hey guys,

I have recently bought a turbo NA6 and having a great time. Its got about 130rwkw so its not crazy fast but still a blast to drive. Not too loud which is nice.

I do my hooning at the track but for peace of mind I would like to get it engineered so its legal all the time. I have heard this is an expensive ordeal and as I cannot afford it as this time, i'm a little worried about defects.

So how many of you are, or have been in the same situation? Were you pulled over and defected for an unengineered turbo, if so how did you tackle it?

For the people who engineered there car, how was the experience and can you recommend a particular engineer for this.

Cheers, Max

Edit: Im in Sydney, NSW
Last edited by MaxPower on Tue Aug 14, 2018 11:00 am, edited 1 time in total.

93_Clubman
Speed Racer
Posts: 11704
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Engineering a turbo NA6

Postby 93_Clubman » Tue Aug 14, 2018 10:57 am

Location?

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Engineering a turbo NA6

Postby NitroDann » Tue Aug 14, 2018 10:58 am

The engineering is cheap.

Unfucking a blatantly illegal car can be expensive.

If the car is actually legal mechanically but only needs the paperwork it's only 6-800 in paperwork and testing. If half the mods need to be redone then it's going to cost half what building it did.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 11:01 am

93_Clubman wrote:Location?


Forgot to say, NSW

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 11:12 am

NitroDann wrote:The engineering is cheap.

Unfucking a blatantly illegal car can be expensive.

If the car is actually legal mechanically but only needs the paperwork it's only 6-800 in paperwork and testing. If half the mods need to be redone then it's going to cost half what building it did.

Dann


That makes sense.

It was actually built by you in December 2016! A blue or red NA6, so it should be easily legal.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Engineering a turbo NA6

Postby NitroDann » Tue Aug 14, 2018 11:46 am

Which car, or post a photo of the bay and ill tell you what it will need. Probably airbox, emissions cat and retune for emissions pass.

Is it EZ71GA?

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 12:06 pm

NitroDann wrote:Which car, or post a photo of the bay and ill tell you what it will need. Probably airbox, emissions cat and retune for emissions pass.

Is it EZ71GA?

Dann


That's the car.

It doesn't have an airbox, same 3" street system.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 12:09 pm

Engine bay
You do not have the required permissions to view the files attached to this post.

User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Re: Engineering a turbo NA6

Postby StanTheMan » Tue Aug 14, 2018 12:25 pm

are the Air boxes for the NA 6's something you can just whip up? or do you need the car at your workshop?
Satans Ride called F33nix the resurrected NA6

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Engineering a turbo NA6

Postby NitroDann » Tue Aug 14, 2018 12:33 pm

I can make one here.

yes it needs tuning, an airbox and a euro4 cat.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 1:08 pm

Dann,

What would be the reason an emissions cat was not installed when you installed the turbo system, customer request or is it a different package?

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Engineering a turbo NA6

Postby NitroDann » Tue Aug 14, 2018 1:13 pm

It's nearly $400 more expensive and he didn't want to get it passed. Airbox too, and no doubt whoever tuned it didn't take the extra time and bill the extra money to get it to pass.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 1:37 pm

Right i see. Bummer, strange why you wouldn't spend the little extra at the time to do it properly.

Seems like getting this thing engineered will be a little more than just the paperwork.

Will just have to drive round as is until I can afford it. Fingers crossed no bad luck.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Engineering a turbo NA6

Postby NitroDann » Tue Aug 14, 2018 1:40 pm

MaxPower wrote:Right i see. Bummer, strange why you wouldn't spend the little extra at the time to do it properly.

Seems like getting this thing engineered will be a little more than just the paperwork.

Will just have to drive round as is until I can afford it. Fingers crossed no bad luck.


Answered your own question.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

MaxPower
Learner Driver
Posts: 15
Joined: Wed Jun 20, 2018 5:04 pm
Vehicle: NA8

Re: Engineering a turbo NA6

Postby MaxPower » Tue Aug 14, 2018 1:43 pm

NitroDann wrote:
MaxPower wrote:Right i see. Bummer, strange why you wouldn't spend the little extra at the time to do it properly.

Seems like getting this thing engineered will be a little more than just the paperwork.

Will just have to drive round as is until I can afford it. Fingers crossed no bad luck.


Answered your own question.

Dann


Touche


Return to “MX5 General Chat”

Who is online

Users browsing this forum: No registered users and 17 guests