Central Locking Kit Install on MX5 SE?

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

The Zork
Fast Driver
Posts: 125
Joined: Fri Jan 06, 2017 2:24 pm
Vehicle: NB SE
Location: victoria

Central Locking Kit Install on MX5 SE?

Postby The Zork » Wed Jun 24, 2020 8:57 am

Has anyone here installed one. Tips, traps, advice? How long does it take?

Nevyn72
Speed Racer
Posts: 2180
Joined: Fri Nov 29, 2013 8:51 am
Vehicle: ND - RF
Location: Sydney

Re: Central Locking Kit Install on MX5 SE?

Postby Nevyn72 » Wed Jun 24, 2020 10:45 am

I think you'll find that the SE already has central locking..... :?
"A Convertible has a top you can put down when the weather's nice...... A Roadster has a top you can put up when the weather's bad."

User avatar
greenMachine
Forum Guru
Posts: 3945
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: Central Locking Kit Install on MX5 SE?

Postby greenMachine » Wed Jun 24, 2020 11:59 am

Mine has it. :?

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )

The Zork
Fast Driver
Posts: 125
Joined: Fri Jan 06, 2017 2:24 pm
Vehicle: NB SE
Location: victoria

Re: Central Locking Kit Install on MX5 SE?

Postby The Zork » Wed Jun 24, 2020 1:03 pm

I thought it did as well. The key fob has Lock, Unlock and Boot buttons.
However, pressing the button Lock only flashes the parkers once. Pressing the Unlock flashes the parkers twice. But the doors neither lock or unlock. Nothing happens when the Boot button is pressed.

I can't check it now. Fuse maybe? or faulty actuators on all 3 doors? Something else?

RS2000
Racing Driver
Posts: 680
Joined: Mon Nov 25, 2013 7:38 am
Vehicle: NB8A
Location: Newcastle

Re: Central Locking Kit Install on MX5 SE?

Postby RS2000 » Wed Jun 24, 2020 1:08 pm

Have you tried a new battery in the fob?

The Zork
Fast Driver
Posts: 125
Joined: Fri Jan 06, 2017 2:24 pm
Vehicle: NB SE
Location: victoria

Re: Central Locking Kit Install on MX5 SE?

Postby The Zork » Wed Jun 24, 2020 3:36 pm

Found the culprit.
I removed the 10A mini fuse which looked at first to be OK. Under a good magnifying glass, I could just see a crack in the fuse wire but not by eye. Multimeter says it's no good.

The Zork
Fast Driver
Posts: 125
Joined: Fri Jan 06, 2017 2:24 pm
Vehicle: NB SE
Location: victoria

Re: Central Locking Kit Install on MX5 SE?

Postby The Zork » Sat Jul 04, 2020 2:12 pm

I replaced the 10amp fuse. Boot opens. Door shut button - doors click and lights flash once, but door still open. Lock manually from inside, Door open button, doors click and lights flash twice, but doors won't open. Both doors the same.

Are both door actuators dead? or is there something else?

User avatar
aka_juffa
Racing Driver
Posts: 1005
Joined: Wed Dec 14, 2011 2:40 pm
Vehicle: NA8
Location: SE Melbourne.

Re: Central Locking Kit Install on MX5 SE?

Postby aka_juffa » Wed Jul 08, 2020 7:26 pm

The Zork wrote:I replaced the 10amp fuse. Boot opens. Door shut button - doors click and lights flash once, but door still open. Lock manually from inside, Door open button, doors click and lights flash twice, but doors won't open. Both doors the same.

Are both door actuators dead? or is there something else?


both could be stuffed, or in need of adjusting.

The only way to confirm is to remove the door card and run through the remote button test again while watching the actuator.

You should also see the inside door lock move when the actuator locks or unlocks each door.

If the actuator rods moves then the actuator may be OK, just needs the rod adjusted to ensure that the actual locking mechanism is moving far enough to work.

This may help you as well. ==> https://www.miata.net/garage/pwrlock.htm
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.

The Zork
Fast Driver
Posts: 125
Joined: Fri Jan 06, 2017 2:24 pm
Vehicle: NB SE
Location: victoria

Re: Central Locking Kit Install on MX5 SE?

Postby The Zork » Wed Jul 08, 2020 11:14 pm

Thanks for that. I'll try that and see what happens

User avatar
greenMachine
Forum Guru
Posts: 3945
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: Central Locking Kit Install on MX5 SE?

Postby greenMachine » Fri Jul 10, 2020 7:06 pm

Just been away with a passenger ... and discovered that my passenger door is not locking on the remote :cry: :shock: . How long has this been so? No idea is the answer, passenger accidently operated exterior handle before I pressed button, I noticed and asked WTF happened there?

Long story short, tomorrow the door card comes off and we'll see ... I can feel the actuator moving, so hopefully it is the adjustment only. Found this ten minutes before the other door busted its window cable ... :x so both doors getting a dose of TLC.

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 8 guests