Exocet AUS-006R

Discussion regarding putting a non MX-5 engine in your MX-5, Exocet, Locost, FM Westfield and other MX-5 based kit cars.

Moderators: timk, Stu, zombie, -alex

D-Train
Driver
Posts: 70
Joined: Tue Feb 16, 2010 11:00 pm
Vehicle: NA8
Location: Morayfield, QLD
Contact:

Exocet AUS-006R

Postby D-Train » Wed Sep 09, 2015 12:24 pm

Hi all,

Some might know me from the track or the QLD MX5 Club end of year presentations as the guy who cleans up in the race car category. However you do, or don't, you may have notice the lack of presence by myself this year around the traps. There is a valid reason for this. At the end of 2014 it was established that I could not beat the time I set earlier in the year with the car in its current state so I sought after a solution to a question I kept asking about how to make my MX5 unique a one of a kind vehicle. As I fell down the rabbit hole I discovered the exocet. Long story short paid deposit, waited a year, collected frame and 4 weeks ago officially started the build. This frame is the first engineered and constructed in Australia so in a way mine is the prototype of the new frames. As it was, I promised myself I would do a full tear down and rebuild excluding engine as I just could not deal with that kind of pressure. Anyway in short, body was removed, power plant frame was torn down, cross members powder coated, replaced all bushes and ball joints and reconstructed. In total not including stripping of body and removal I've spent 39 hours to this stage. 61 hours left to finish within the suggested time of construction for a novice.


CAR BEFORE:
viewtopic.php?f=57&t=40870

Image

PROGRESS:
Image
Image
Image
Image
Image
Image
MX5 Club of Queensland RACE CAR CLASS Winner 2011/2012/2013/2014
Lakeside: 62.4755
QR Sprint: 62.1253
QR Clubman: 65.0325
QR National: 90.0925

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Exocet AUS-006R

Postby project.r.racing » Wed Sep 09, 2015 1:58 pm

Dean. If you pulled apart the red car, I will turn up on your doorstep and give you a smack. I will forgive you and a smack can be prevented if you come say hi sometime after you have finished the build. Or if you need a hand with the build, gimme a bell.

D-Train
Driver
Posts: 70
Joined: Tue Feb 16, 2010 11:00 pm
Vehicle: NA8
Location: Morayfield, QLD
Contact:

Re: Exocet AUS-006R

Postby D-Train » Wed Sep 09, 2015 5:17 pm

Yeah mate I'll come see you when I'm finished. Not really needing a hand (yet) as its been a super easy build so far. Got a few things to do that require different skill sets however and I'm attempting these with guidance.
MX5 Club of Queensland RACE CAR CLASS Winner 2011/2012/2013/2014
Lakeside: 62.4755
QR Sprint: 62.1253
QR Clubman: 65.0325
QR National: 90.0925

D-Train
Driver
Posts: 70
Joined: Tue Feb 16, 2010 11:00 pm
Vehicle: NA8
Location: Morayfield, QLD
Contact:

Re: Exocet AUS-006R

Postby D-Train » Wed Sep 09, 2015 11:09 pm

Had to test fit the frame so I can reroute the brake and fuel lines how I want them. So here's a sneak peak at what it'll look like.

Image
MX5 Club of Queensland RACE CAR CLASS Winner 2011/2012/2013/2014
Lakeside: 62.4755
QR Sprint: 62.1253
QR Clubman: 65.0325
QR National: 90.0925

User avatar
lightyear
Infinity & Beyond
Posts: 2331
Joined: Mon Jun 02, 2008 7:54 pm
Vehicle: NA6 - Turbo
Location: s.e. melbourne

Re: Exocet AUS-006R

Postby lightyear » Thu Sep 10, 2015 8:56 am

looks like an aero monster

I hope it goes well for you.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3

D-Train
Driver
Posts: 70
Joined: Tue Feb 16, 2010 11:00 pm
Vehicle: NA8
Location: Morayfield, QLD
Contact:

Re: Exocet AUS-006R

Postby D-Train » Fri Sep 11, 2015 10:09 am

So after fitting the body I've already identified a few problems.

● Brake booster lines touch frame
● Pedal boxes are too close together and steering column does not mount correctly.
● Due to it not fitting on mounts hole for sterring column is too far over and won't reach rack.
● I believe I wasn't supplied enough brake or fuel line, so will be cutting and reworking the originals.

FUN TIMES AHEAD!
MX5 Club of Queensland RACE CAR CLASS Winner 2011/2012/2013/2014
Lakeside: 62.4755
QR Sprint: 62.1253
QR Clubman: 65.0325
QR National: 90.0925

User avatar
corners
Racing Driver
Posts: 1127
Joined: Mon Aug 20, 2007 1:33 pm
Vehicle: ND - Supercharged
Location: Brisbane, QLD

Re: Exocet AUS-006R

Postby corners » Wed Sep 23, 2015 2:56 pm

Subscribed! Glad to see some progress!
Steampunk wrote: Oh you've got Ohlins? You must like drugs too!!!

User avatar
Sean
Racing Driver
Posts: 1755
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB8A
Location: NSW
Contact:

Re: Exocet AUS-006R

Postby Sean » Tue Apr 26, 2016 7:03 pm

Any updates?
Have heard exocet aren't really doing business with the local guy anymore - would be cool to see another local one finished.
When results speak for themselves - don't interrupt.

User avatar
Callumgw
Driver
Posts: 29
Joined: Thu Jun 09, 2016 10:25 am
Vehicle: ND - Supercharged
Location: Melbourne

Re: Exocet AUS-006R

Postby Callumgw » Thu Nov 09, 2017 9:28 pm

How'd this build get on? Had any track time yet?

Sent from my SM-G930F using Tapatalk


Return to “Engine swaps, Exocet, Locost & MX-5 kit cars”

Who is online

Users browsing this forum: No registered users and 9 guests